QolorFLEX® SHoW DMX Neo® 2x5A Dimmer (Legacy Product)

City Theatrical's QolorFLEX® SHoW DMX Neo® 2x5A Dimmer (legacy product) is the size of a credit card and 1/2" thick. This two channel low voltage dimmer comes equipped with CTI's patented SHoW DMX Neo wireless technology. It can receive and output DMX (a full universe) command instructions from up to 200 feet away making it the ideal dimmer for use in costumes or other freestanding/mobile props where direct wiring is not practical or possible. 
P/N Name
5722M QolorFLEX® SHoW DMX Neo® 2x5A Dimmer - Discontinued


Additional Information

DMX Control Features

The QolorFLEX® SHoW DMX Neo® 2x5A Dimmer includes:

  • SHoW DMX Neo® 2.4GHz Frequency Hopping Spread Spectrum (FHSS) Radio (Wireless version)


Other Features

All Units Include:

  • Two dimmer output channels
  • Max output per dimmer channel 5A
  • Max total output per device 10A
  • Screw terminal connections for power input and dimmed output
  • Individually protected against over-current
  • Individually protected against over-temperature
  • Individual bump buttons
  • PWM resolution 16-bit
  • Dimming Curves
    • Linear, 60Hz
    • ISL, 60Hz
    • Non-Dim
  • LED Features
    • Five variable LED smoothing rates
    • Four Film and Video Modes
  • Individual DMX addresses
  • Fully RDM enabled


  • NEMA 1 ABS enclosure

    Electronic/ Functional Features

    • Bump Buttons
    • DIP Switch, DMX Addressing (9POS)
    • DIP Switch, SHoW ID addressing (8POS)
    • DIP Switch, Curve Selection (4POS)
    • DIP Switch, LED Curve PWM Frequency Selection (4POS)
    • DIP Switch, DMX Termination (wired DMX units only, 1POS)
    • LED indicators:
      • Dimmer pilot lights (one for each channel)
      • Data (data present)
      • RF Signal Strength (4 LEDS) Low to High
      • Status


    • RoHS Compliant
    • CE Pending
    • FCC Pending

    Model QolorFLEX® SHoW DMX Neo® 2x5A
    Catalog Number  5722M
    Output Channels 
    Input Voltage 
    7.5 ~ 30VCD 10A
    Max Output per Chanel 5A@12V
    Max DImmer Output 10A@12V
    Size L x W x H 3.5" x 2.25" x .5" (88.9mmx57.2mmx12.7mm)
    Weight 2.4 Oz
    Power Connections 
    Screw Terminals
    Output Connections 
    Screw Terminals
    DMX Connections 
    Screw Terminals
    User Interface 
    DIP Switches
    DMX Address 


    Curve Selection 


    Film & Video Modes 
    Yes - *5  (Fifth setting accessed through RDM only)
    DMX Termination 


    SHoW ID 
    Bump Buttons 
    Pilot Lights 
    Status Lights 
    Smoothing Settings 
    Yes - 6 Variable
    Stand Alone Settings 
    FCC, CE, RoHS
    Reset Switch 
    Power Supply 
    Not Included

    Title Description
    pdf QolorFLEX Wireless DMX Dimming at IIDA's 21st Annual Fashion Show

    Architect Dore + Whittier was submitting a design for the Robin Hood look to the IIDA Fashion Show and reached out to Port Lighting to find out how they could best integrate lighting into the costume. The theme of the show was “portals”, and the design used interior design materials such as jute webbing and burlap from flooring tiles, rockwool insulation, and laser cut pieces of cork flooring. They sought a way to illuminate the jacket and boots by integrating LED tape.

    Port Lighting used their LED installation experience from interior or theatrical projects to craft an LED and dimming solution that could look beautiful while moving and on camera. The lighting team oversaw the testing of LEDs and dimmers to use with the outfit, and the drapery department sewed and assembled the outfit.

    The lighting team from Port Lighting used four QolorFLEX wireless DMX Dimmers, one for each shinguard, one in the back plate, and one placed in a custom-sewn pocket on the right side of jacket, each controlled wirelessly with a single SHoW DMX SHoW Baby 6 device with an external panel antenna mounted backstage, giving the model free movement over the course of a two-minute choreographed walk down the runway.

    “We went with QolorFLEX wireless DMX Dimmers because we needed something that was small enough to integrate into the costume, could be controlled wirelessly, and had a strong dimming curve so it wouldn’t flicker on camera. QolorFLEX delivered.” - Ron Kuszmar, VP, Architectural and Theatrical Lighting, Port Lighting Systems

    pdf SHoW DMX Neo® Used To Help Transform Charlie And The Chocolate Factory Into A World Of Pure Imagination The new musical Charlie and the Chocolate Factory at the Theatre Royal, Drury Lane, has been the most eagerly anticipated opening in London's West End this year. With direction by Sam Mendes, set and costumes by Mark Thompson, and Lighting Design by Paul Pyant, it is this summer's golden ticket.

    City Theatrical worked closely with UK specialist lighting contractor Howard Eaton to realize the demanding wireless DMX requirements. As well as using SHoW DMX Neo® Transceivers and Receivers, the production marked the first use of the new D2 and D4 Dimmers.
    Date Title Description
    pdf 10/21/2021 1031 QolorFLEX Dimmers 5722 & 5742 The latest firmware for 5722M and 5742M require minimum level of firmware installed in the 5792M SHoW DMX Neo Max radio module.
    Load more reviews
    Thank you for the review! Your review must be approved first
    Comment by from