/
Color Kinetics Data Power Supplies
Color Kinetics

Power/Data Supplies and Accessories for Philips Color Kinetics® Products

The PDS-750 TRX and PDS-375 TRX combine advanced new LED fixture control and configuration features with multi-control protocol interoperability and powerful new data management resources in a single lighting control unit, and represent the first practical implementation of all of these features in  single units. The units can be controlled with all popular Ethernet protocols including Streaming ACN, Art-Net, or Ki-Net, as well as wired and wireless DMX512, and are fully RDM enabled.  Every unit includes a built-in SHoW DMX ® receiver. 

The PDS-750 TRX and PDS-375 TRX provide full control capability for the Philips Color Kinetics ColorBlast 12 TRX, as well as 16-bit and 8-bit ColorBlast 12 TRs, iW Blast 12s, conventional 8-bit ColorBlast 12s, ColorBlast 6s, ColorSplash 2s, and other CKDMX fixtures.  Each of the outputs (12 on the PDS-750 TRX and six on the PDS-375 TRX) can be individually configured for the quantity of DMX slots required and the starting DMX address.

Other features include a built-in three port managed switch to provide an Ethernet pass-thru to downstream devices, and a built-In Ethernet node gateway which when using one of the Ethernet control protocols allows the assignment of any of the 12 outputs (or the DMX output) to one of two virtual DMX512 universes. 

The PDS-750 TRX and PDS-375 TRX can also reconfigure Philips Color Kinetics LED fixtures remotely via RDM control of Zapi features.



PDS-750 TRX DIMENSIONS 

Product NameXYZWeight 
PDS-750 TRX

19"
48.25 cm

5.25"
13.35 cm

8"
20.35 cm
14 lbs.
6.35 kg
 
PDS-375 TRX12.5"
31.8 cm
9.75"
24.8 cm
5.25"
13.3 cm
11.25 lbs.
5.1 kg
 

Additional Information

  • City Theatrical and Philips Color Kinetics have teamed up to develop a full line of power/data supplies and accessories for popular Color Kinetics professional lighting products  

OTHER PRODUCTS AND ACCESSORIES FOR PHILIPS COLOR KINETICS LED LIGHTING FIXTURES

City Theatrical manufactures the widest range of products and accessories available for Philips Color Kinetics LED products.  We have the products that lighting designers and lighting specifiers need to make their lighting installations more artistic, easier to install, and more successful overall. 

If you don't see an accessory that you need, call us.  We'll design and build it for you!


 

MASTERBLAST™

the MasterBlast is a portable, battery operated Color Kinetics LED lighting fixture that is controlled with SHoW DMX wireless DMX.  No power or data cables are needed to operate it and each unit can be configured as either a master or slave.  With its built in stand alone modes, one MasterBlast can broadcast its routines out to dozens of even hundreds of other MasterBlasts!  

Click here to for complete MasterBlast information.


 

ACCESSORY HOLDER

Accessory Holders attach to the side of the lighting fixture (using the fixture's pre-tapped holes) to allow the user to insert a range of accessories.  Accessory Holders provide a secure mounting platform, prevent accessories from falling out if the unit is tipped or hung upside down, and block any stray spill light from the fixture.  Accessory Holders are required for mounting any additional accessories to ColorBlaze or ColorBlast fixtures.  Accessory holders can often accommodate more than one accessory (e.g. lens and top hat).  

120-000001-00Accessory Holder for ColorBlaze 72, White120-000003-03Accessory Holder for ColorBlast 12, White
120-000001-01Accessory Holder for ColorBlaze 72, Black120-000003-04Accessory Holder for ColorBlast 12, Black
120-000001-02Pro-Series Accessory Holder for ColorBlaze 72, White120-000004-03Accessory Holder for ColorBlast 6, White
120-000001-03Pro-Series Accessory Holder for ColorBlaze 72, Black120-000004-04Accessory Holder for ColorBlast 6, Black
120-000002-00Accessory Holder for ColorBlaze 48, White6223WAccessory Holder for ColorBlast 12 Powercore , White
120-000002-01Accessory Holder for ColorBlaze 48, Black6223Accessory Holder for ColorBlast 12 Powercore Black
120-000002-02Pro-Series Accessory Holder for ColorBlaze 48, White6224WAccessory Holder for ColorBlast 12 Powercore (Sideload) White
120-000002-03Pro-Series Accessory Holder for ColorBlaze 48, Black6224Accessory Holder for ColorBlast 12 Powercore (Sideload) Black
  120-000090-00ColorReach TR Accessory Holder & Yoke
  120-000090-01ColorReach TR Accessory Holder & Yoke with Data Enabler Tray

 

Dimensions
 
Product NameXYZ
ColorBlaze 7268"1/2"1/2"
ColorBlaze 4846"1/2"1/2"
ColorBlast 1212 3/4"5 1/2"1/2"
ColorBlast 66 1/2"5 1/2"1/2"

 

TOP HATS
2490_Top_Hat_Round_Frame_Source_Four_PAR_MEDTop Hats serve two important functions:  control spill light to a predictable area and prevent the audience or viewers from seeing the bright and possibly distracting source of the light.  Top Hats drop into Accessory Holders and are held in place by a flange secured by two screws.   Top Hats are available for a variety of fixtures.
120-000005-03Top Hat for ColorBlast 12, White
120-000005-04Top Hat for ColorBlast 12, Black
120-000006-03Top Hat for ColorBlast 6, White
120-000006-04Top Hat for ColorBlast 6, Black
120-000092-00Top Hat for ColorReach
 

 

HALF TOP HATS
120-000009-04_Half_Top_Hat_ColorBlast_MEDHalf Top Hats are similar to Top Hats, but are angled on one side, preventing the viewer from seeing the bright source of light, while not restricting the beam on one side.  Half Top Hats drop into Accessory Holders and are held in place by a flange which also prevents light leaks.   Top Hats are available for a variety of fixtures.
120-000009-03Half Top Hat for ColorBlast 12, White
120-000009-04Half Top Hat for ColorBlast 12, Black
120-000010-03Half Top Hat for ColorBlast 6, White
120-000010-04Half Top Hat for ColorBlast 6, Black
120-000093-00Half Top Hat for ColorReach
 
Dimensions
Product NameXYZ
ColorBlast 1211 3/4"4 5/8"3" tapering to 1/2"
ColorBlast 65 5/8"4 5/8"3" tapering to 1/2"

 

EGG CRATE LOUVERS
Egg Crate Louvers serve a similar function to a Top Hat, but do so in only 1/2"of depth.  A 45 degree cut-off is obtained by using cells that are 1/2" x 1/2", by 1/2" deep.  Egg Crate Louvers drop into Accessory Holders, and give a sleek appearance to the lighting fixture while providing good beam control.  Egg Crate Louvers are available for a variety of fixtures.
20-000015-03Egg Crate Louver for ColorBlast 12, White6346WEgg Crate Louver for Blast 12 TR, White
120-000015-04Egg Crate Louver for ColorBlast 12, Black6346Egg Crate Louver for Blast 12 TR, Black
120-000016-03Egg Crate Louver for ColorBlast 6, White120-000091-00Egg Crate Louver for ColorReach
120-000016-04Egg Crate Louver for ColorBlast 6, Black  

 

Dimensions
Product NameXYZ
ColorBlaze 72   
ColorBlaze 48   
ColorBlast 12
12"
4 5/8"
1/2"
ColorBlast 6
5 5/8"
4 5/8"
1/2"

 

BARN DOORS
 

Barn doors provide adjustable beam control.  Movable doors can be set to cut off stray beams where needed, such as off of scenery or projection screens.  Barn Doors drop into the Accessory Holders.  Barn Doors are available for a variety of fixtures.

120-000019-03Barn Door for ColorBlast 12, White6340WBarn Door for Blast 12 TR, White
120-000019-04Barn Door for ColorBlast 12, Black6340Barn Door for Blast 12 TR, Black
120-000020-03Barn Door for ColorBlast 6, White120-000094-00Barn Door for ColorReach TR
120-000020-04Barn Door for ColorBlast 6, Black  
120-000020-05Barn Door for ColorBlast 6, Aluminum  
 

Dimensions
Product NameXYZ
ColorBlast 1216 1/2"6 1/4"1"
ColorBlast 610 1/4"6 1/4"1"

 

POLYCARBONATE HOLOGRAPHIC LENSES
Click here to see images of the Holographic lenses

Our Polycarbonate Holographic Lenses are available in a variety of symmetrical and asymmetrical beamspreads to fit most lighting needs.  These lenses will fit directly (no extra accessory holder needed) into ColorBlast 12 TR and iW Blast TR , and with the PN 6319 Lens Adapter they can be used in ColorBlast 12, and ColorBlast 12 Powercore (accessory holder required). 

6310Blast 12 TR 10° Lens6315Blast 12 TR 30°  x 1° Lens
6311Blast 12 TR 20° Lens6316Blast 12 TR 30°  x 5° Lens
6312Blast 12 TR 30° Lens6317Blast 12 TR 40°  x .2° Lens
6313Blast 12 TR 40° Lens6318Blast 12 TR 60°x 10° Lens
6314Blast 12 TR 60° Lens6319Lens Adapter
6320Blast 12 Symmetric Lens Kit (five lenses)6321Blast 12 Asymmetric Lens Kit (four lenses)
    

 

GLASS SPREAD LENSES

Glass Spread Lenses are available to spread the beam from the standard beamspread of 22° out to 36°, 40°,  or 50° (the 36°/ 50° lens projects 36° when inserted with the ribs on the lens facing out, and 50° with the ribs facing in). Glass Spread Lenses drop into Accessory Holders and can be used in conjunction with Top Hats, Half Top Hats, or Egg Crate Louvers.  Glass Spread Lenses are available for ColorBlaze 72, ColorBlaze 48, ColorBlast 12, ColorBlast 6, ColorBurst 6, and ColorBurst 4.


120-000023-00Glass Spread Lens for ColorBlaze 72, 36°(ribs out) /50°(ribs in) horizontal spread only120-000026-00Glass Spread Lens for ColorBlast 6, 36°(ribs out) /50°(ribs in) horizontal spread only
120-000023-01Glass Spread Lens for ColorBlaze 72, 40° horizontal/vertical spread120-000026-01Glass Spread Lens for ColorBlast 6, 40° horizontal/vertical spread
120-000024-00Glass Spread Lens for ColorBlaze 48, 36°(ribs out) /50°(ribs in) horizontal spread only120-000027-00Glass Spread Lens for ColorBurst 6, 36° (ribs out) /50° (ribs in) horizontal spread only
120-000024-01Glass Spread Lens for ColorBlaze 48, 40° horizontal/vertical spread120-000027-01Glass Spread Lens for ColorBurst 6, 40° horizontal/vertical spread
120-000025-00Glass Spread Lens for ColorBlast 12, 36°(ribs out) /50°(ribs in) horizontal spread only120-000028-00Glass Spread Lens for ColorBurst 4, 36° (ribs out) /50° (ribs in) horizontal spread only
120-000025-01Glass Spread Lens for ColorBlast 12, 40° horizontal/vertical spread120-000028-01Glass Spread Lens for ColorBurst 4, 40° horizontal/vertical spread
Replacement Glass for CK Fixtures   
6205Adhesive for CK replacement glass  
6210Replacement Glass for ColorBlast 12, Frosted6212Replacement Glass for ColorBlast 12, Clear
6214Replacement Glass for ColorBlast 6, Frosted6216Replacement Glass for ColorBlast 6, Clear
6220CTI Install New Glass in ColorBlast 12, Frosted6222CTI Install New Glass in ColorBlast 12, Clear
    

 

Dimensions
Product NameXYZ
ColorBlast 1212 1/2"5 1/4"1/8"
ColorBlast 66 1/4"5 1/4"1/8"
ColorBlaze 72   
ColorBlaze 48   
Other Products 
6350iW Controller 
6335Mounting Base for 5/8" Pin
  
  
 

PHOTOMETRICS
 

Custom accessories are available to meet your needs. Contact City Theatrical and we will engineer a solution for you with a fast turnaround. 

Date Title Description
pdf 10/21/2021 1018 PDS-750 TRX The PCBA Temperature Sense IC U29 (Microchip TC74) on some units may fail at elevated temperatures.
pdf 10/21/2021 1019 PDS-750 TRX and PDS-375 TRX Incompatible USB memory sticks
pdf 10/21/2021 1021 PDS-750 TRX™ Units with serial numbers listed below may have been programmed with incorrect MAC Address and RDM UID
10/21/2021 1022 PDS-750 TRX and PDS-375 TRX A DMX termination issue is corrected
Load more reviews
Thank you for the review! Your review must be approved first
Rating
Comment by from
Rating