click image to enlarge

    Aquafog 3300™

    Share this page:


    A new concept in dry ice fog. This water-based system is light-weight, portable and durable, allowing you to create large amounts of billowing fog. The AQUAFOG 3300™ features a durable molded thermoplastic tank for corrosion resistance and light weight. No more rusting steel drums to replace. The large lid lifts for easy loading of the stainless steel ice shelf. All electrical components are conveniently located behind the electrical panel. A powerful stainless steel pump brings heated water from the tank up to the dry ice. A 6" fan pressurizes the tank and sends the fog out to the stage.


    TANK
    The heart of the AQUAFOG 3300™ is our custom designed and molded plastic tank. Plastic is both lightweight and corrosion resistant, and many of the plumbing and electrical fittings use pressure seals to ensure extended leak-proof use. The large lid makes it easy to lay the ice in the machine.
     

    3300_Dry_Ice_Fog_Machine_115V_Aquafog_3300_MED


    ELECTRICAL

    AQUAFOG 3300™ conveniently plugs into wall outlets, no need for 220 volts. Circuit breakers control the dual 1650 watt heating elements, fan and pump. Indicator lights show the status of the water temperature and heating elements at a glance. A low water level cutout switch assures that the heaters will not operate if the water is low. The sophisticated adjustable water temperature circuit will bring the temperature from a range of 100 through 160 degrees (F) and will maintain temperature all through your long rehearsals. The convenient 4-plug system allows for easy remote control. 

     


    DOLLY

    The large 8" rear wheels and the 3 1/2" front swivel casters make moving a breeze.



     
     
    Name A B C Part Number
    Aquafog 3300™ 120v 38”
    96.52cm
    21 1/2”
    54.61cm
    31”
    78.74cm
    3300
    Aquafog 3300™ 230v 38”
    96.52cm
    21 1/2”
    54.61cm
    31”
    78.74cm
    3303
     

    Features


    • Award winning lightweight, portable, dry ice fog machine holds 28 gallons (106 litres) of water and 75 lbs. (34kg) of dry ice
    • 120v electrical system with circuit breakers, indicator lights for water temperature and heating element status, low-water cutout protection and an adjustable sensing circuit to maintain temperature over extended use periods
    • Non-corroding thermoplastic tank features an extra large access lid for easy loading with integral casters for transport

    Specifications


    Tank
    Material High temperature plastic polymer
    Dimensions 21 1/2” x 31” x 38” (including casters) (546mm x 787mm x 965mm)
    Water capacity 28 gallons (106 litres)
    Ice capacity 75 lbs. (34 kg.)
    Casters 3 1/2” (88.9mm) swivel front, 8” (203mm) fixed rear
    Hose vent 4” (101.6mm) molded into tank
    Fill Door 20” x 30” (508mm x 762mm)
    Weight empty 115 lbs. (52kg.)
    Shipping weight 130 lbs. (59kg.)
    Weight fully loaded 455 lbs. (208.19kg.)
       
    Plumbing
    Pump Stainless steel 10GPM (37.85 litres/min.)
    Fittings All stainless, brass or high temperature plastic
       
    Electrical
    Voltage 120v, 230v available
    Heating elements 120v 1650 watt; 230v 3000 watt (two) screw in
    Thermostat Adjustable automatic control (100°F-160°F) (38°C-71°C)
    Overtemperature: 175°F (79°C) cutout, manual reset
    Low water cutout Turns off heaters when water is low
    Blower 240 CFM axial (6.799 CMM)
    Circuit breakers-Type 20 amp on heating element 2 amp (lighted) on fan & pump

    Videos

    Images

    Downloads


    Aquafog3300 Documentation:

    Aquafog3300 Cut Sheet
    Aquafog3300 User's Manual

    Dry Ice FAQ and Safety:
    Dry Ice FAQ
    Dry Ice Safety
    Material Safety Data Sheet (MSDS) for Carbon Dioxide

    Tech Bulletins:
    1000 - Revised method of attaching wheels to axle
    1006 - Methods for repairing an Aquafog pump
    1011 - A change in the Aquafog pump mounting bracket


    Types

    Case Studies