/
Pathway
pathway

PWPP Rack Mount DMX Gateway, 4-Port

PWPP Rack Mount DMX Gateway, 4-Port, the Pathport® Secure DMX-RDM Ethernet Rack-mount Gateway (Legacy Name: Pathport QUATTRO) is a compact four-port version of the popular DMX-over-Ethernet management gateway.

Connect DMX512 control devices and send data over an Ethernet network to DMX512-capable end devices such as intelligent lighting fixtures, LEDs, Dimmers, and more. Each port can be configured as an Input or Output as needed. Advanced features include extensive protocol support, slot-by-slot patching using multiple sources, cross-fading on priority change, and signal loss behavior. 

Multiple connector options are available, such as 5-Pin XLR, terminal block, and RJ45 etherCON®. Status LEDs for each port provide instant confirmation of DMX activity and direction. The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction, and protocol selection. Different Ethernet protocols may be merged together and prioritized.

For more information, visit Pathway Connectivity's PWPP Rack Mount DMX Gateways product page.

2022 Description   2022 Part Number  Legacy Description Legacy Part Number
       
 Pathport, Rack-mount, 4-Ports, XLR 5-Pin Female, Rear Panel Connectors   PWPP RM P4 XLR5F REAR  Pathport QUATTRO 4-Port Gateway with Rear XLR5F  P6321
       
 Pathport, Rack-mount, 4-Ports, Compression Fit Terminal, Rear Panel Connectors   PWPP RM P4 TERM REAR  Pathport QUATTRO 4-Port Gateway with Rear Terminal  P6322
       
 Pathport, Rack-mount, 4-Ports, RJ45 EtherCON, Rear Panel Connectors   PWPP RM P4 RJ45EC REAR  Pathport QUATTRO 4-Port Gateway with Rear RJ45 EtherCon  P6326
       

-

   Pathport QUATTRO 4-Port Gateway with Tabletop rea XLR5F with External 24V PS  P6321.24
       
 Power Supply, Wallwart, Barrel, 24 Watts, 24 Volts DC  PWPWR WW BARL 24W 24VDC  24 Watt, 24VDC Auxiliary Power Supply, Wallwart (Uno, Quattro, Cognito, PER)  1001-024-24-WW

 

Pathway Connectivity landing page banner

Additional Information

  • Four DMX512 ports, individually configurable
  • 10/100Mb Ethernet port
  • Front panel UI supports configuration of  IP settings, port direction, basic patching and more
  • Route DMX on either a universe or channel-by-channel basis
  • Map up to eight sources to each output channel, with merge and/or priority options user-set for each source
  • Acts as E1.20 RDM proxy controller, when used with freely downloadable Pathport Manager software
  • DMX output speed and signal loss behavior user-selectable
  • Compact size - two gateways may fit side-by-side in 1RU of space
  • Rackmount ears included
  • Operates on Poe (Power over Ethernet) or auxiliary 24-48VDC power supply (accessory)
  • Supports the  following Ethernet protocols
    1. oE1.31 streaming ACN (sACN)
    2. Art-Net
    3. Pathport Protocol
    4. Shownet
  • Class 2 Power-over-Ethernet device - 8W maximum
  • Auxiliary input voltage 24-48VDC
  • Operating Conditions:  -10 to +50°C, 5-95% relative humidity, non-condensing

Control Device Type Gateway
   
Mounting Location Portable
   
Mounting Type Clamp, Desktop, Rack Mount, Surface
   
Product Type Gateway
   
Network Compatibility DMX, RDM
   
Networkable Control Yes
   
Voltage Rating Line Voltage, Low Voltage, MVOLT
   
# of Comm. Ports 4
   
Receiving Protocol RDM, RDMnet, DMX, Dry Contact, Ethernet
   
Sending Protocol DMX, RDM, RDMnet, sACN
   
Dimming Protocol DMX, RDM, RDMnet, sACN
   
Compliance Listing CA Title 1.81.26, ROHS
   
Regulatory Listing CE, ETL
   
Series PWPP

Title Description
.pdf Pathway Connectivity Pathport C-Series at National Music Forum in Wroclaw, Poland The National Forum of Music (NFM), a brand-new, state-of-the-art concert venue in the heart of Wroclaw, opened on September 4th, 2015. The National Forum of Music is the largest multi-purpose center in Lower Silesia, Poland. The main aim of the center was to create a public institution comprising the Ministry of Culture and National heritage. The NFM needed to come up with a solution to help light all these separated theatres and rooms, without the hassle of cables and wiring. They chose City Theatrical wireless DMX solutions and Pathway Connectivity PATHPORT® C Series nodes in the NFM installation. “In our current situation with the National Forum of Music, we often come across the necessity of conversion of commonly used Ethernet signal into the Traditional DMX standard. The Ethernet signal simultaneously transmits multiple DMX signals and the Pathway node can isolate the desired DMX universe without the necessity of using extra power supplies- the power is being supplied by Ethernet due to POE option. The pathway node is extremely useful to use, the setting is configured from simple software from any computer. The greatest thing about the Pathway C-Series node is that it works impeccably no matter what project we’ve worked on.”
Load more reviews
Thank you for the review! Your review must be approved first
Rating
Comment by from
Rating