click image to enlarge

QolorFLEX® 2x5A Dimmer

Share this page:

QolorFLEX® 2x5A Dimmers provide a tiny but powerful and affordable new way to control LED tape, other LEDs, or low voltage incandescent fixtures. These new miniature dimmers are two channels, with either an integrated SHoW DMX Neo® Wireless DMX Receiver or a wired DMX input. 




Learn more about City Theatrical's QolorFLEX LED Tape.

Name Cat. #
QolorFLEX®  2x5A Dimmer 5720
QolorFLEX®  2x5A SHoW DMX Neo® Dimmer 5722M


DMX Control Features

The QolorFLEX® 2x5A Dimmer includes:


  • SHoW DMX Neo™ 2.4GHz Frequency Hopping Spread Spectrum (FHSS) Radio (Wireless version)
      • Wirelessly receive and output a full Universe (512 slots) of DMX
      • Extremely low 7mS latency
      • RDM proxy and responder functions
      • Included 2dBi Omni-directional Flexible Cable Antenna
      • SHoW DMX Neo and SHoW DMX Neo Adaptive wireless broadcast modes (SHoW IDs 101-164, 201-204) , compatible with SHoW DMX Neo Transceiver, SHoW DMX SHoW Baby Transceiver, SHoW DMX Vero Net Transceiver, SHoW DMX Vero Transceiver, MasterBlast


QolorFLEX®  2x5A 

Dimmer (wired DMX versions) include:

  • 3P Screw Terminals for DMX Out

Other Features

All Units Include:

  • Two dimmer output channels
  • Max output per dimmer channel 5A
  • Max total output per device 10A
  • Screw terminal connections for power input and dimmed output
  • Individually protected against over-current
  • Individually protected against over-temperature
  • Individual bump buttons
  • PWM resolution 16-bit
  • Dimming Curves
    • Linear, 60Hz
    • ISL, 60Hz
    • Non-Dim
  • LED Features
    • Five variable LED smoothing rates
    • Four Film and Video Modes
  • Individual DMX addresses
  • Fully RDM enabled


  • NEMA 1 ABS enclosure

    Electronic/ Functional Features

    • Bump Buttons
    • DIP Switch, DMX Addressing (9POS)
    • DIP Switch, SHoW ID addressing (8POS)
    • DIP Switch, Curve Selection (4POS)
    • DIP Switch, LED Curve PWM Frequency Selection (4POS)
    • DIP Switch, DMX Termination (wired DMX units only, 1POS)
    • LED indicators:
      • Dimmer pilot lights (one for each channel)
      • Data (data present)
      • RF Signal Strength (4 LEDS) Low to High
      • Status


      • ETL Listed




       QolorFLEX®  2x5A Dimmer



       QolorFLEX®  2x5A Dimmer

      Catalog Number 5720
      Output Channels
      Input Voltage
      7.5 ~ 30VCD 10A
      Max Output per Channel 5A@12V
      Max DImmer Output 10A@12V
      Size L x W x H 3.5" x 2.25" x .5" (88.9x 57.2m x 12.7mm)
      Weight 2.4 Oz
      Power Connections
      Screw Terminals
      Output Connections
      Screw Terminals
      DMX Connections
      Screw Terminals
      User Interface
      DIP Switches
      DMX Address


      Curve Selection


      Film & Video Modes
      Yes - *5  (Fifth setting accessed through RDM only)
      DMX Termination


      SHoW ID
      Bump Buttons
      Pilot Lights
      Status Lights
      Smoothing Settings
      Yes - 6 Variable
      Stand Alone Settings
      Compliance CE
      Reset Switch
      Power Supply
      Not Included





      Case Studies

      A Conversation on LED Tape with the designers of The Band's Visit
      QolorFLEX LED Tape, QolorFLEX 2x5A Dimmers, and QolorFLEX 4x2.5A Dimmers in The Band's Visit on Broadway. Lighting Design by Tyler Micoleau. Set Design by Scott Pask. Photo by Matthew Murphy features Adam Kantor, Bill Army, and Sharone Sayegh.

      Read the Conversation on LED Tape from the unique perspectives of Tony Award winning lighting and scenic designers, Tyler Micoleau and Scott Pask, from The Band’s Visit to see how they use it for this show and other projects.