Our iW Blast TR Lighting Kit features bright white LEDs with color temperature you can set yourself right on the
controller. A full lighting kit that sets up in minutes, with all the
versatility you need for location lighting. Low power consumption,
interchangeable lenses, barndoors and louvers, adjustable stands and a rugged
ATA rated flight case are all included in the kit.
|
|
|
|||||||||||||||
Downloads iW Blast TR Lighting Kit Cut Sheet iW Controller Users Manual iW Blast Brochure |
||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
|
iW Blast 12 TR Fixture
(sold only as part of a kit) The iW Blast 12 TR is the heart of our lighting kit. The iW Blast 12 TR features 36 high intensity warm/cool LEDs that allow you to vary your color temperature from 2700K to 6500K. These fixtures are compact, robust, and built for harsh everyday use. We've made them even better by adapting them for use in professional lighting by making a range of parts and accessories previously unavailable, which allow the fixtures to be used in ways specific to film/video and photography lighting users. Each kit contains three iW Blast TR fixtures, and kits are available without fixtures if you are providing your own. We do not sell fixtures alone. They must be purchased with a minimum of an iW Controller. For individual fixtures, please contact your Philips Color Kinetics distributor. |
|
8' Stand with 5/8" Pin We designed these light but very durable adjustable lighting stands to meet the needs of this lighting kit. Strong and stable and able to reach a height of eight ft. (2.43m) these stands will provide a stable base for your iW Blast 12 TR fixtures. The stands are supplied with a 5/8" pin that mates with our custom mounting base for the fixture (shown below). Each kit contains three 8' Stands. |
|
Blast
12 Symmetric and Asymmetric Lens Kits City Theatrical has developed these unique lens kits specifically for the Philips Color Kinetics ColorBlast 12 TR and iW Blast TR LED lighting fixtures. The LED fixtures come from the Color Kinetics factory with removable glass lenses (one clear and one frosted). We recommend putting these aside and using our City Theatrical lenses. Our lenses are unbreakable polycarbonate, and utilize a holographic method of creating various beam spread on a thin surface. Our Symmetric set contains five lenses, 10°, 20°, 30° , 40° , and 60° . Our Asymmetric set contains four lenses: 30° x 1° , 30° x 5° , 40° x .2° , and 60° x 10°. A good visual representation of their relative sizes can be found here. City Theatrical polycarbonate holographic lenses are for indoor use only. Each kit contains three sets of Symmetric Lenses and three sets of Asymmetric Lenses. |
|
Mounting Base for 5/8"
Pin This mounting base (a City Theatrical exclusive) allows your iW Blast 12 TR to be mounted to the 8' Stand with 5/8" Pin. By first removing the adjustable foot that comes on the back of the Philips Color Kinetics fixture and then replacing it with this Mounting Base, the iW Blast 12 TR can then be stand mounted. Each kit contains three Mounting Bases for 5/8" pin. Note: if you choose to use your own iW Blast 12 TRs you will need to purchase these Mounting Bases separately. |
|
Blast 12 TR Barndoor This is a classis lighting barn door made specifically for the iW Blast TR (or the ColorBlast 12 TR). It snaps on in seconds with no tools or fasteners and allows some beam shaping, as well as a convenient place to mount other accessories that you may wish to use to shape or diffuse the beam. An integral safety cable is included. Each kit contains three Barndoors
|
|
Blast 12 TR Egg Crate
Louver Our Egg Crate Louver helps prevent a bright glare in the eyes of your subjects or the audience. It can be used with the Barndoor or by itself and also attaches with no fasteners in just seconds. Each kit contains three Egg Crate Louvers |
|
iW Controller The iW Controller was invented by City Theatrical and is the only stand-alone controller for the iW Blast 12 TR. This Controller clamps onto the lighting stand with its included clamp, and give you control of intensity and color temperature right at the point of use. The iW Blast 12 TR connects into the iW Controller via its four pin XLR connector, and an IEC connector feeds line voltage (100/240 VAC 50/60 Hz) to into the iW Controller. A lighted on-off switch controls power. A four pin XLR female on the bottom allows connection to a City Theatrical 24V Battery Base for battery powered operation. An iW Controller 24V Battery Cable (see below) is sold separately. Each iW Controller controls one iW Blast 12 TR fixture. Each kit contains three iW Controllers. |
|
iW Blast Three Unit Case This rugged ATA rated flight case holds all of the parts of the three light kit securely and safely during transport. The dimensions of the case are 47" x 24" x 11.5" ( 119.4cm x 60.9cm x 29.2cm) and the fully loaded case weighs 105 lbs. (47.5kg).
Each kit includes one iW Blast Three Unit Case. |
| Parts and Accessories Not Sold as Part of the Kit | |
|
|
Battery
Base 12/24V The Battery Base 12/24V allows battery operation of the iW Blast TR Lighting Kit. Simply unplug the IEC mains input, and plug in the iW Controller 24 V Battery Cable into the Battery Base, and the other end of the iW Controller 24V Battery Cable into the iW Blast 12 TR lighting fixture. Lighting time at full power output is up to three hours, depending on battery condition. This part is not included in the kit and is sold separately. Read our Working with Batteries White Paper |
|
iW Controller 24V Battery
Cable The iW Controller 24V Battery Cable allows the iW Blast 12 TR to be operated on battery power from a City Theatrical #6280 Battery Base for up to three hours at maximum output. (See above) This part is not included in the kit and is sold separately. |
|
12V 5A Autocharger 115V-230V, with Connectors This part is not included in the kit and is sold separately.
|
|
Twofer,
18” with Anderson Connectors Use this charging twofer to decrease your charging time by charging both 12V batteries at once. This part is not included in the kit and is sold separately. |
|
System Features:
• (3) CTI TV/Film Stands • (3)
CTI Nine-Piece Polycarbonate Holographic Lens Set • (3)
CTI Blast 12 TR Barndoors iW
Controller Features:
• Faders for Level and Color Temperature • Control
and power for one iW Blast® 12 TR • 4P XLR M for Battery Power (battery and battery cable optional)
• 4P XLR F for connection to iW
Blast 12 TR
Available
Optional Accessories:
Need more information? Contact our sales department. 201-549-1160, or in Europe at +44 (0)20 8949 5051
|
|
