QolorFLEX® SHoW DMX Neo® 2x5A Dimmer (Legacy Product)

Part Number(s) 5722M

City Theatrical's QolorFLEX^® SHoW DMX Neo^® 2x5A Dimmer (legacy product) is the size of a credit card and 1/2" thick. This two channel low voltage dimmer comes equipped with CTI's patented SHoW DMX Neo wireless technology. It can receive and output DMX (a full universe) command instructions from up to 200 feet away making it the ideal dimmer for use in costumes or other freestanding/mobile props where direct wiring is not practical or possible.

P/N		Name

5722M		QolorFLEX^® SHoW DMX Neo^® 2x5A Dimmer - Discontinued

Additional Information

DMX Control Features

The QolorFLEX^® SHoW DMX Neo^® 2x5A Dimmer includes:

SHoW DMX Neo^® 2.4GHz Frequency Hopping Spread Spectrum (FHSS) Radio (Wireless version)

Other Features

All Units Include:

Two dimmer output channels

Max output per dimmer channel 5A

Max total output per device 10A

Screw terminal connections for power input and dimmed output

Individually protected against over-current

Individually protected against over-temperature

Individual bump buttons

PWM resolution 16-bit

Dimming Curves
- Linear, 60Hz
- ISL, 60Hz
- Non-Dim
LED Features
- Five variable LED smoothing rates
- Four Film and Video Modes
Individual DMX addresses

Fully RDM enabled

Mechanical

NEMA 1 ABS enclosure

Electronic/ Functional Features

Bump Buttons

DIP Switch, DMX Addressing (9POS)

DIP Switch, SHoW ID addressing (8POS)

DIP Switch, Curve Selection (4POS)

DIP Switch, LED Curve PWM Frequency Selection (4POS)

DIP Switch, DMX Termination (wired DMX units only, 1POS)

LED indicators:
- Dimmer pilot lights (one for each channel)
- Data (data present)
- RF Signal Strength (4 LEDS) Low to High
- Status

Compliance

RoHS Compliant

CE Pending

FCC Pending

Model		QolorFLEX^® SHoW DMX Neo^® 2x5A

Catalog Number		5722M

Output Channels		2

Input Voltage		7.5 ~ 30VCD 10A

Max Output per Chanel		5A@12V

Max DImmer Output		10A@12V

Size L x W x H		3.5" x 2.25" x .5" (88.9mmx57.2mmx12.7mm)

Weight		2.4 Oz

Power Connections		Screw Terminals

Output Connections		Screw Terminals

DMX Connections		Screw Terminals

User Interface		DIP Switches

DMX Address		Yes

Curve Selection		Yes

Film & Video Modes		Yes - *5 (Fifth setting accessed through RDM only)

DMX Termination		Yes

SHoW ID		N/A

Bump Buttons		Yes

Pilot Lights		Yes

Status Lights		Yes

Smoothing Settings		Yes - 6 Variable

Stand Alone Settings		N/A

RDM		Yes

Compliance		FCC, CE, RoHS

Reset Switch		Yes

Power Supply		Not Included

	Title
pdf	Legacy 5722M and 5742M QolorFLEX 2x5A and 4x2.5A SHoW DMX Neo Dimmers Cut Sheet
pdf	Legacy 5720 5722M 5740 5742M QolorFLEX 2x5A and 4x2.5A Wired and Wireless Dimmers Quick Start Guide
pdf	Legacy 5722M SHoW DMX Neo® D2 Dimmer User's Manual
zip	Legacy 57xx SHoW DMX Firmware
pdf	QolorFLEX USA Brochure - City Theatrical
pdf	QolorFLEX LED Tape, Dimmers, QolorFLEX NuNeon and QolorPIX Professional Experience with case study links

	Title	Description
pdf	QolorFLEX Wireless DMX Dimming at IIDA's 21st Annual Fashion Show	Architect Dore + Whittier was submitting a design for the Robin Hood look to the IIDA Fashion Show and reached out to Port Lighting to find out how they could best integrate lighting into the costume. The theme of the show was “portals”, and the design used interior design materials such as jute webbing and burlap from flooring tiles, rockwool insulation, and laser cut pieces of cork flooring. They sought a way to illuminate the jacket and boots by integrating LED tape. Port Lighting used their LED installation experience from interior or theatrical projects to craft an LED and dimming solution that could look beautiful while moving and on camera. The lighting team oversaw the testing of LEDs and dimmers to use with the outfit, and the drapery department sewed and assembled the outfit. The lighting team from Port Lighting used four QolorFLEX wireless DMX Dimmers, one for each shinguard, one in the back plate, and one placed in a custom-sewn pocket on the right side of jacket, each controlled wirelessly with a single SHoW DMX SHoW Baby 6 device with an external panel antenna mounted backstage, giving the model free movement over the course of a two-minute choreographed walk down the runway. “We went with QolorFLEX wireless DMX Dimmers because we needed something that was small enough to integrate into the costume, could be controlled wirelessly, and had a strong dimming curve so it wouldn’t flicker on camera. QolorFLEX delivered.” - Ron Kuszmar, VP, Architectural and Theatrical Lighting, Port Lighting Systems
pdf	SHoW DMX Neo® Used To Help Transform Charlie And The Chocolate Factory Into A World Of Pure Imagination	The new musical Charlie and the Chocolate Factory at the Theatre Royal, Drury Lane, has been the most eagerly anticipated opening in London's West End this year. With direction by Sam Mendes, set and costumes by Mark Thompson, and Lighting Design by Paul Pyant, it is this summer's golden ticket. City Theatrical worked closely with UK specialist lighting contractor Howard Eaton to realize the demanding wireless DMX requirements. As well as using SHoW DMX Neo® Transceivers and Receivers, the production marked the first use of the new D2 and D4 Dimmers.

Title

Description

pdf

QolorFLEX Wireless DMX Dimming at IIDA's 21st Annual Fashion Show

Architect Dore + Whittier was submitting a design for the Robin Hood look to the IIDA Fashion Show and reached out to Port Lighting to find out how they could best integrate lighting into the costume. The theme of the show was “portals”, and the design used interior design materials such as jute webbing and burlap from flooring tiles, rockwool insulation, and laser cut pieces of cork flooring. They sought a way to illuminate the jacket and boots by integrating LED tape.

Port Lighting used their LED installation experience from interior or theatrical projects to craft an LED and dimming solution that could look beautiful while moving and on camera. The lighting team oversaw the testing of LEDs and dimmers to use with the outfit, and the drapery department sewed and assembled the outfit.

The lighting team from Port Lighting used four QolorFLEX wireless DMX Dimmers, one for each shinguard, one in the back plate, and one placed in a custom-sewn pocket on the right side of jacket, each controlled wirelessly with a single SHoW DMX SHoW Baby 6 device with an external panel antenna mounted backstage, giving the model free movement over the course of a two-minute choreographed walk down the runway.

“We went with QolorFLEX wireless DMX Dimmers because we needed something that was small enough to integrate into the costume, could be controlled wirelessly, and had a strong dimming curve so it wouldn’t flicker on camera. QolorFLEX delivered.” - Ron Kuszmar, VP, Architectural and Theatrical Lighting, Port Lighting Systems

pdf

SHoW DMX Neo® Used To Help Transform Charlie And The Chocolate Factory Into A World Of Pure Imagination

The new musical Charlie and the Chocolate Factory at the Theatre Royal, Drury Lane, has been the most eagerly anticipated opening in London's West End this year. With direction by Sam Mendes, set and costumes by Mark Thompson, and Lighting Design by Paul Pyant, it is this summer's golden ticket.

City Theatrical worked closely with UK specialist lighting contractor Howard Eaton to realize the demanding wireless DMX requirements. As well as using SHoW DMX Neo® Transceivers and Receivers, the production marked the first use of the new D2 and D4 Dimmers.

	Date	Title	Description
pdf	10/21/2021	1031 QolorFLEX Dimmers 5722 & 5742	The latest firmware for 5722M and 5742M require minimum level of firmware installed in the 5792M SHoW DMX Neo Max radio module.