click image to enlarge

QolorFLEX® 5x8A Dimmer

Share this page:
QolorFLEX® 5x8A Dimmer (PN5809): The QolorFLEX® 5x8A  Dimmer can control a full 40A of LED tape spread 8A each.  This allows the control of unique combinations such as RGB tape (three channels) and bi-color tape (two channels), or RGBX tape (four

channels) and a single color tape (one channel) together in one unit. The 5X8A  uses constant voltage technology which ensures consistent full range dimming that is especially important at low end light levels. An easy to read onboard display and four button user interface allows selection and control of six functions: setting DMX addresses, setting quantity of DMX channels, selecting 8 or 16 bit output resolution, setting PWM frequency (500Hz to 30KHz), setting output dimming curve values for matching the dimming curves of other dimmers in use, setting the device’s operating profile, and setting stand alone modes.  The 5X8A  Dimmer is also RDM capable.

The unit requires a separate power supply providing input voltage of 12-24VDC. The maximum current load per channel is 8A with a maximum device output of 40A.

The 5x8A  Dimmer is designed to operate perfectly with City Theatrical’s QolorFLEX LED tape, the LED tape of professionals on Broadway, network television, and architectural lighting installations.

 Description  CTI Part #
QolorFLEX® 5x8A Dimmer  5809


 CTI Part #  

 Maximum Current per device:   40A
 Maximum load per output channel:   8A
 User Interface:   4 button, plus alpha/numeric display 
Output channels:   User selectable of one to five 
 Resolution:   User selectable- 8 bit or 16 bit 
 PWM Frequencies:   User selectable- 500Hz to 30KHz 
 Dimming Curves:   User selectable- 99 
 DMX Connections:   5-Pin XLR, RJ45, Screw Terminals
 RDM capable:   Yes
 Construction:   NEMA 1 IP 20 steel enclosure 
 Compliance:   CE, RoHS, FCC 
 Weight  .851bs (.39 kg) 
 Dimensions  2.88"(73mm) W x 6.5" (165mm) L x 1.5"(38mm) H 





Case Studies