click image to enlarge

QolorFLEX™ 4x2.5A Dimmer

Share this page:


The QolorFLEX™ 4x2.5A Dimmers provide a tiny but powerful and affordable new way to control LED tape, other LEDs, or low voltage incandescent fixtures. These new miniature dimmers are four channels, with either an integrated SHoW DMX Neo® Wireless DMX Receiver or a wired DMX input. 

  

Click on the link for information on City Theatrical's QolorFLEX™ LED Tape.

Name Cat. #
QolorFLEX™ 4x2.5A Dimmer 5740
QolorFLEX™ 4x2.5A SHoW DMX Neo® Dimmer 5742M
 

Features


DMX Control Features


The QolorFLEX™ 4x2.5A Dimmer includes:


  • SHoW DMX Neo™ 2.4GHz Frequency Hopping Spread Spectrum (FHSS) Radio (Wireless version)
      • Wirelessly receive and output a full Universe (512 slots) of DMX
      • Extremely low 7mS latency
      • RDM proxy and responder functions
      • Included 2dBi Omni-directional Flexible Cable Antenna
      • SHoW DMX Neo and SHoW DMX Neo Adaptive wireless broadcast modes (SHoW IDs 101-164, 201-204) , compatible with SHoW DMX Neo Transceiver, SHoW DMX SHoW Baby Transceiver, SHoW DMX Vero Net Transceiver, SHoW DMX Vero Transceiver, MasterBlast

The QolorFLEX™ 4x2.5A Dimmer (wired DMX versions) include:

  • 3P Screw Terminals for DMX Out

Other Features


All Units Include:


  • Four dimmer output channels
  • Max output per dimmer channel 5A
  • Max total output per device 10A
  • Screw terminal connections for power input and dimmed output
  • Individually protected against over-current
  • Individually protected against over-temperature
  • Individual bump buttons
  • PWM resolution 16-bit
  • Dimming Curves
    • Linear, 60Hz
    • ISL, 60Hz
    • Non-Dim
  • LED Features
    • Five variable LED smoothing rates
    • Four Film and Video Modes
  • Individual DMX addresses
  • Fully RDM enabled

Mechanical


  • NEMA 1 ABS enclosure

    Electronic/ Functional Features


    • Bump Buttons
    • DIP Switch, DMX Addressing (9POS)
    • DIP Switch, SHoW ID addressing (8POS)
    • DIP Switch, Curve Selection (4POS)
    • DIP Switch, LED Curve PWM Frequency Selection (4POS)
    • DIP Switch, DMX Termination (wired DMX units only, 1POS)
    • LED indicators:
      • Dimmer pilot lights (one for each channel)
      • Data (data present)
      • RF Signal Strength (4 LEDS) Low to High
      • Status

      Compliance


      • RoHS Compliant
      • CE 
      • FCC 

      Specifications


      Power: 7.5-30VDC 10A Max Power Input
      Weight: 0.15 lbs/.08Kg
      Dimensions: 2.25”/57mm W x3.5”/60mmH x 0.56”/14mmD (excluding antenna) 

      Videos

      Images


      Types

      Case Studies