click image to enlarge

QolorFLEX™ 3x10A Dimmer

Share this page:


The 

QolorFLEX™ 3x10A Dimmer  was designed to provide exceptional power and flexibility in a low voltage DC control unit.  The QolorFLEX™ 3x10A Dimmer Dimmer can be configured as three separate 10A dimmers, two 15A dimmers, or one 30A dimmer.  It will operate with any DC voltage between 9-24VDC and can be used with batteries or with mains-powered DC power supplies to control 3 channels of LEDs, Incandescent lamps, effects, or any other device that runs on 9-24V DC power.  The 3 channel configuration is ideal for controlling RGB LED systems. Each dimmer channel can be separately configured with any of four different output profiles, including ISL curve dimming (for incandescent loads), linear dimming, LED dimming with five TV/Film Modes and six smoothing options, or Non-Dim operation.  The unit may be configured either locally via the Button pad and LCD user interface, or via RDM. 


Anderson Connectors

City Theatrical uses 30A Anderson Power Pole connectors to connect loads to our low voltage dimmers.  These connectors require a special crimping tool.  Instructions for crimping can be found in the downloads section below.


Click on the link for information on City Theatrical's QolorFLEX™ LED Tape.

Name Cat. #

QolorFLEX™ 3x10A Dimmer                  

5620



Anderson Connectors:

Name Cat. #
Anderson Connector, Red 5660
Anderson Connector, Black 5661
Anderson Connector, Yellow 5662
Anderson Connector, Blue 5663
Anderson Connector, Orange 5664
Twofer, 18" w/Anderson Connectors 5656

Features


QolorFLEX™ 3x10A  Dimmer Features


  • NEMA 1 enclosure, Aluminum and Steel
  • Accessory Mounting Plate for panel or pipe mounting included
  • User Interface:
      • (5) Control Pushbuttons: Back, Forward, Up, Down, Enter
      • 16 character x 2 row LCD display, Monochrome, Backlit
      • Recessed Reset pushbutton
      • DMX/RDM termination switch

  • Connections:
      • XLR5PM for DMX/RDM input, XLR5PF for DMX/RDM pass-thru
      • (8) 45A Anderson Powerpole connectors as 1 x 2P set Dimmer Power IN and 3 x 2P sets as Dimmer Outputs

  • Individually controllable via DMX or RDM
  • 4 selectable output formats
      • ISL (incandescent) dimming curve
      • Linear (incandescent) dimming curve
      • LED dimming curve with five TV/Film Modes and six smoothing options
      • Non Dim

Configuration Options


  • Dimmer Personality (configure with 1, 2 or 3 DMX Addresses)
  • DMX Start Address
  • ISL, Linear, ND, or LED Dimmer (settable separately for each)

RDM Functions


  • RDM Discovery
  • Identification
  • DMX Addressing
  • Configuration
  • Battery Voltage
  • Device Label
  • Data Loss Timeout
  • Test Level
  • Output Format

Specifications


Weight:  2 lbs

Dimensions: 6.25”W x 2.375”H x 5.125”D

ComplianceETL Listed, CE certified, FCC Emissions certified

Accessories: Accessory plate (provided), outdoor use enclosure, SHoW DMX cables

Videos

Images



Types

Case Studies